Im running way way way to rich, not exactly sure how to lean it out.. I know its something simple but I searched and didnt see anything..
Im running way way way to rich, not exactly sure how to lean it out.. I know its something simple but I searched and didnt see anything..
So, how do you know you're running way to rich? How are you measuring the AFR?
02 Camaro Vert SS
lets just put it this way, if you light a cigarette behind my car while its running youll blow up.. I need to take it out and scan it.. I am looking to adjust the ltfts? right? so theyre at 0?
I would scan as soon as possible and see if your LTFT's are maxed out. Closed loop ought to be correcting for a rich condition.
2001 QS/Black Z06, Borla Stingers, Vararam, Longtube headers, HPTuners
I have been scanning but it still wont pull up the ltft's, Ive run it for 50 minutes and well over 50 miles and it still not showing.. any ideas?
Send me your BIN file and the scanner logs. I think you are either not logging the correct stuff (are you using the default configuration on the scanner?), or something is skewed in your program. I will gladly check it out for you.
Reply With Quote